⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Tube TVs

TV. Daewo screen failure

Horacio Moscoso
hace 5 años
hace 5 años
Tv daewo of tube 21 "mod. DTA-21A2, shows in the whole screen colors red green blue in a concentric way as if a magnet had approached it but in the whole screen. Attached tv image without tuning channel that the screen should show blue.
manolo karvalo
hace 5 años

friend. Start with the ptc. if the fault persists continue with the ic. vertical but first solved the pins of the ic. vert.

Responder
manolo karvalo
hace 5 años

friend. What chassis number does the TV have?

Responder
Horacio Moscoso
hace 5 años

Hi, I think this is kb-3150. Thank you

Responder
manolo karvalo
hace 5 años
hace 5 años
Hello Friend. the elements that make that fault is the ic. vertical you have to change it for another and change the filters that are associated with that ic. vertical if the fault persists change the ptc. It is like a little black box that is there where the mangnetizer cable was connected. and the other is the socket when it is sulfated inside but most likely it is the vertical and the ptc. Cheers
Horacio Moscoso
hace 5 años

Thanks, I am placing components and checking welds

Responder
Victor E
Victor E
65.783
hace 5 años
hace 5 años
That is not a vertical fault. It is a strong magnetization in the inner metal mask of the tube. Place a new ptc and that effect will disappear. Greetings
Horacio Moscoso
hace 5 años

Thanks, I will be placing components on the patient patience plate.

Responder
Horacio Moscoso
hace 5 años

Apparently the ptc is wrong, it was disassembled and the internal contacts were made towards the discs of some material that have internally turned one of the discs to improve the contact and will be cold, it marks me 21ohm between pin 2 and 3 of the ptc of three legs. Now I ask, do I try the TV with the repaired ptc?

Responder
Victor E
Victor E
65.783
hace 5 años

Place a new ptc. You run the risk of it being bad and the fault returns or the fuse or the printed circuit blows. Better solution and closure

Responder
Horacio Moscoso
hace 5 años

Thanks I put the repaired ptc and the tv works well. I boy replaced him with a new one. I just wanted to try if it was just that. Thank you. Solved

Responder
Victor E
Victor E
65.783
hace 5 años

Ok, greetings.

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis