⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Tube TVs

Plate change

Hrp18

6

hace 5 años

hace 5 años

Can someone tell me if you can put a tokyo tube TV board to a speed screen, the two are 14 ".

Comentar



Victor E

65.783

hace 5 años



hace 5 años

If they are generic plates, you can walk, after a small reform, but if one is slim and the other is not, it cannot be exchanged. greetings

Comentar

Hrp18

6

hace 5 años

And as it is known whether or not it is generic, I do not understand much of these things



Responder

Victor E

65.783

hace 5 años

You must see if the tube or screen are the same, if there are differences, it does not work for you. Apart from that, you must adapt the tabs of the yoke, speaker output and other miscellaneous.



Responder

Hrp18

6

hace 5 años

Should the flyback be changed too?



Responder

Victor E

65.783

hace 5 años

no, the one carrying the plate is used.



Responder

Hrp18

6

hace 5 años

I am going to try



Responder

Hrp18

6

hace 5 años

Friend, another question is regarding the connection of the yoke has four cables in the one of the good screen it has a connection near the flyback and the other has 2 connections near the flyback



Responder

Victor E

65.783

hace 5 años

that is for the width of the image, you can correct it with the ones that are free.



Responder

Reparaciones similares solucionadas

¡Aprende a reparar con estos cursos YoReparo!

¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?

Regístrate gratis