tv with audio and vertical problem
Good night, The descriptions of the failures are not well understood, for the image failure, try to upload a photo, for the audio one, try to solve the fault by renewing the capacitor 2444 470µF for 16 Volts for 150 Degrees. The chassis must be L03. 1LA because with the model that says I found absolutely nothing at all
Good brother, what happens is that it has two different faults, for now it must consent to a stage, or audio or vertical,
let's start with the audio, replaces the capacitor that says NEG2013, that if he says it is for experience
rectify the audio ic if you have jac for hearing aids also rectify it, also check other electrolytic
With a signal tracker, check that sound is coming to the IC through the IN R IN L pins, and exit through the OUT R OUT L pins.
ready change the c2444 470 micro x 16 volts and yeah I solved the audio problem now I still have to resorb the vertical problem is missing in the upper part almost four fingers to open and almost three fingers in the bottom to open thanks for the help with the audio problem tell me if I should baol the solution or end with the vertical problem and then baloro thanks again
It is advisable to use the capacitors that tell part 105 ° (Degrees) The audio fault related to this 2444 capacitor will often appear, if the best known 85 ° is used, but if you use a 105 ° one the faults will take a little longer to reappear. (This is merely an experience of your own)
good afternoon thank you for all your recommendations I just changed c2465 10mFx160v and I solved the vetical problem in the part d now I am fartered to solve the problem in the bottom are what you recommend me to continue changing capacitors and then I comment and I appreciate your help Thanks again
after changing the c2465 10 mFx160v that opened the top with the remote control set the sun and the screen opened full thanks for all your help I will close these questions and rate
I told you that the vertical fault appeared again the part of ariba was again serrated the c2465 = 10mFx160v was warming vastly I believe that the damage again hopefully it does not merge into a head breaker when this happened is already getting dark and I will not touch it tomorrow I change the condenser again and I tell you
It is possible to hurt is human to change it I tell you thank you again have a great day
good afternoon friend NEG2013 I again with my phillips tv I tell you to check to see if there was a bad capacitor that I told you because it is well mounted change it and have the TV working well I hope not to damage it again