Ken Bromw KB-2-29 Slim B Brings the Trh TT2076 and in the PlanFigure D
you are right victor the chassis is psw29uta may have brought that trh is the voltages are all but those of flay because the trh does not oscillate.
I measured all the capacitors with the capachek and they give me good.
control with the oscilloscope and the jungle does not send the signal to the trh even though it has 4.7v at the vcc hout input
in the beginning I had 0v in the driver transistor collector and I didn't have the 5v for the jungle vcc hout but if I had the 9vol in the emitter and collector trv571un the v571 and the 5v appeared for the jungle they were actually 4.7v but it was still having 0 v in the driver transistor, lift the collector of the driver transistor and the 26v appear, change the driver transistor and the vertical ci, and in the collector of the driver transistor it had 12 to 13v. I have 120v of + b I have power to the jungle vcc hout I have voltage in the tr driver but the phone does not start there is no signal in the base trhoriz.
I already changed the micro jungle and it remains the same which leads me to think that flyback is these days I will also change what happened is that I still haven't got the original
I see that the micro jungle in its pin 43 has communication with the flay in the pin 6 of the same that would be the feeding of the filament and in turn with the pin 8 also of the flay.
This micro pin is indicated with the acronym EHT, what does this mean?
I do not get the flay bsc27-05n2537r and they told me that it has no replacement I am thinking of buying the one that comes universal and I apologize I apologize for the delay in answering but this TV is taking me too long then I advance on others that I have in the workshop so that I do not work is piled up and delayed with other jobs
I thank you for your help, my friend Victor, who very kindly helped me to solve this problem and to the technicians of I repair that they always respond and give me their support have helped me to solve many difficulties that have presented me in the repairs thank you very much