TV 14 "Daewoo DTQ14V1FS It turns white
Diagram here
https://tecnicoreparacion.blogspot.com/2013/10/cn-001a-diagrama-tv-daewoo-dtq-20v1fs.html
Thanks for your response, solve the jungle jungle by turning on the TV and it turns white. which fails more rare thanks
And well if the customer removes it so we will do it. Too bad he doesn't continue investigating and with the solution. But that tensions are good can not be. Otherwise I would not have such a failure. Once something like this happened to me and it was the + b diode. It was cut right where the pin comes out. I discovered it unintentionally in the dark. Because it made a spark. And the tv was perfect. I already gave him change until the flyback. When it turns white press the scrin and see if it improves. Or if it looks good, throw a little Asia out of it. The other is that you tap or twist the plate. And see if it's false contact
Tell the client that it will not last and that you are not responsible.
Rate the contributions at your discretion. But the problem was not resolved. I think you should not close the subject.
He is very right they have not taken it and it is true when I touch the writing it gets better but I will listen to you I will check again thanks for your support
thanks for your answer pus resolves the flaid back area and so now it has worked well really thank you very much
Don't give so many thanks. Thank rating the contributions. If you don't like it, put your thumb down and that's it.
And close the subject