GE TV: 20GT425; Chassis: CTC146E
General electric TV model 20gt425 ctc 146e chassis, does not start and I have 5ven the keys and 105 in the input filter, I do not know if that voltage of the filter is correct, it seems to me that no please help me
I have doubt with the Q102 which, when removed and measured between base and emitter, measures me resistance
If 105v you are measuring it in the filter that is after the diode bridge. Yes, that's wrong. Or your tester marks badly. There must be more than 150v. Now if it is in the + b filter of 47uf at 220uf x 160v at 220v this birn may be. You should mention the location of said capacitor so as not to confuse.
Hello, I already turned on the TV, I thought I had false, but no, what I did is with a toothbrush and with thinner clean the jungle pins and so turned on, I hope it does not fail, I thank you for your help infinitely
Download Diagram through this link:
https://www.yoreparo.com/es/tv/televisores/tubo/preguntas/1061334/rca-f20539-dg-ctc146l-no-prende-solicito-diagrama-y-ayuda
if it closes, I have 105 in the fat filter also in the B plus, in the collector of the hz output driver I have 92 in stand by
and when I give power the voltage drops to a volt
I did not find false so I cleaned the jungle pins with a thinner and a brush and it worked for me, hopefully not fail, thank you very much for your input