⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Tube TVs
Replace capacitor tv ken briwn 29 slim
18
hace 6 años
hace 6 años
Hello, i wnat to know if can do the following: i need to replace the capacitor c487 of this tv is NON POLARIZED, i read that it can be replaced by joining to capacitors 22Uf. My doubt is that the original capacitor is of 50v and i have a 22UF /150V so it triples the voltage .... would it be correct to replace it or not ? Since it is not the original value
30.814
hace 6 años
hi friend, you have to measure hoy many volt. run along that line where the filter goes, what's the tv chassis number.
14.048
hace 6 años
Good evening, if you're referring to the chassis PSW29UTA, which can take as reference the chassis that does have publications of diagrams, the PX20172, the condenser C487 according to the diagram you mentioned, is of 6. 8 ?F but the voltage is cleared, anyway, is hard to find chinese chassis diagrams with a hundred per cent true information. This condenser is not a commercial one, but actually, many of those values that usually come in these devices also do not come, what you do is to connect two electrolytic condensers in such a way that it becomes in non polarized.
30.814
hace 6 años
hace 6 años
hi friend. if you have the filter of 22ufx150volt. there's not a problem, you can set it, the problem would be that the filter that you want to set is of less value in uf or volt. answering your question, you can set that filter of 22ufx150volt. for the one of 22ufx50volt. greetings
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad