Good is my first time in this forum, I tell you I do not dedicate myself to the repair of tv and I do not have much electronic knowledge, the problem is as follows, I got a tv aoc model le32h1352 that did not turn on, there was only the fixed standby led, this tv has a main board with source and led driver all together, replace it with another, now turn on but it has the image inverted, there I saw that I could solve it from a service menu that is accessed from the command, the next problem is that it does not respond to the command and does not turn on the standby LED, with the previous board if you turn on the LED but not with this one, I hope you can help me solve it, attached photo of the plate, thanks in advance.
⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
LCD TVs - LED
Good is my first time in this forum, I tell you I do not dedicate myself to the repair of tv and I do not have much electronic knowledge, the problem is as follows, I got a tv aoc model le32h1352 that did not turn on, there was only the fixed standby led, this tv has a main board with source and led driver all together, replace it with another, now turn on but it has the image inverted, there I saw that I could solve it from a service menu that is accessed from the command, the next problem is that it does not respond to the command and does not turn on the standby LED, with the previous board if you turn on the LED but not with this one, I hope you can help me solve it, attached photo of the plate, thanks in advance.
TV aoc model le32h1352 inverted image and does not respond remote
Televisor Aoc LE32H1352
Televisor Aoc LE32H1352
18 Soluciones
48 Reparaciones
hace 5 años
hace 5 años
Good is my first time in this forum, I tell you I do not dedicate myself to the repair of tv and I do not have much electronic knowledge, the problem is as follows, I got a tv aoc model le32h1352 that did not turn on, there was only the fixed standby led, this tv has a main board with source and led driver all together, replace it with another, now turn on but it has the image inverted, there I saw that I could solve it from a service menu that is accessed from the command, the next problem is that it does not respond to the command and does not turn on the standby LED, with the previous board if you turn on the LED but not with this one, I hope you can help me solve it, attached photo of the plate, thanks in advance.
120
hace 5 años
hace 5 años
Try disconnecting the infrared receiver and see if you can handle it with the TV buttons
hace 5 años
The problem is that I need to recognize the command to solve the inverted image, the problem is in the main and I don't know where to start, in the connector that goes to the infrared receiver I have two values of 5v one gives me 0.6 and another one of 4v.
120
hace 5 años
I am half a rookie in this, and so in the distance it gets complicated, what seems strange to me is the standby issue, look at the tensions of that part, also, does the control work well?
hace 5 años
If the control works well, I am comparing trends between the plates to see if I find something
hace 5 años
I had some capacitors to change in the source, now I have 5v in one of the connectors that gave 0v, in another 0.6 but the problem persists
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad