Greetings Libardo, well look you must measure, between the points that say Led- and Led + not with plate ground, there must be enough voltage to light the LED bars, if not, you have problems at the source, luck .
hello friend Fernando Bari I tell you already measured the voltages and marked 1 54.7 vol. the 2 45.4 vol. the 3 45.4 vol. the four 42 .8 with the reference to ground of the same connector and in order as it lights each bar which already tested and lit, I find neither the scheme nor the datasheet of the fet to test them, I don't know why the difference of the voltages I don't know what the correct measure should be, can you please guide me Thank you