⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
LCD TVs - LED
replace SMD resistance with common?
118
hace 5 años
hace 5 años
Hello good morning folks, I ask you an LDC the problem is the primary source and I changed the switching FET and the IC I have an open SMD resistor right next to the primary source IC the issue is that I do not get it and I do not have left other than welding a common resistance?
gives good results oh I am going to limit many current to the IC that is ace in these cases ???
22.858
hace 5 años
maybe it makes you give a pass to the law of ohm, the current that limits a resistance being of the same value, is the same, regardless of size, of course you have to put the closest in wats to the one you need, you can put the 1/2 wats always and when I have the space. Be sure to set the correct value, indicated in the diagram or on the resistance body if it is visible. comment if you know how to interpret that values .... greetings.
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad