This TV turns on with the keypad or the remote control, the JVC logo appears, then the TV SMART logo, and then it is left with no image, with minimal brightness, and the keypad is locked and does not operate with the remote either. I would appreciate if someone knows what may be causing the problem and / or how to solve it, pass me the data. I send you the data of the TV and other equivalent models. From already thank you very much for your cooperation. Best regards. Company: JVC Model: LT-32DA765 Chassis: MTK5655 Matrix: HISENSE Remote Control: RM-C3192 / EN2H27 Wifi: WU182-LO MainBoard: RSAG7.820.6487 PowerBoard: RSAG7.820.5268 Equivalent Model: NOBLEX 32LD879HI PIONEER PLE32HMS4 PHILCO PLD3216HI SANYO LCE32IH16 SANSEI TDS1632HI TONOMAC TO-3216-HDS [B] There are instructions in the following file: [/b]Actualización firmware of the LED TV “JVC” LT-32DA765.docx [13.29kb] Greetings

hello could you pass me the firmware to download it thanks.

Hello, Could you pass me the firmware, it is for a PIONEER PLE32HMS4 that is branded in the logo. From already thank you very much.

I have the same tv with the same problem, can someone guide me to know where to download the firmware and also if they would be kind enough to tell me how the firmware update is done?

wuacho you can download from here https://www.mundotecnico.info/viewtopic.php?t=2147 little fox, from here https://www.mundotecnico.info/viewtopic.php?t=1645 mundotecnico is a reliable site, luck