32 kalley tv led mod.hdzt2 with predator image how to fix it
Televisor RCA TV
Televisor RCA TV
the vesa / jeida is a continuous level that reaches the main tcon, is corrected from the service mode but I don't know how to enter your TV, "" "" "" I uploaded the code of the t-con plate "" "" "is the one on the display, if it does not have the panel code. we look and change the level in physical form, you can also put the eeprom of the old main, if this good will work for you
I uploaded the code of the tcon board and we looked at the datasheet of the board
In short, the new main is configured for another screen
MT3151A05-5-xc-5 PLATE t-con TA631974AP05101EY1MA 1615 ST3151A05-8 ver.2.2 these are the numbers that appear in the T-CON
HOW CAN I GET TO THE SERVICE MODE OF THIS TV KALLEY DE32 LED THANK YOU FOR YOUR COLLABORATION
http://www.datasheetspdf.com/pdf/903530/CSOT/MT3151A05-2/1
from here you can download the data sheet
pin 9 of the lvds connector is the video format configuration pin, vesa / jeida, you have to change state
What is the tension of pin 9?
pin 9 is in 2 volts don toviastv that dev has to where there is to place grasses for his passivity
yes of course you have to take a risk in all ways I will do it but I tell you that pin 9 is voting for 1.2 volts and I changed it to other places and nothing greasy tobias for your passport boi to take some other volts of the pins aver that can happen
good morning toviastv boy has what you tell me to see how it goes and after that I tell you thanks for your support