billy58

2.182

hace 5 años

Hi excuse me that's drama on the panel

joseluisgonzalez

22

hace 5 años

Sorry bylli58 I did not understand?

billy58

2.182

hace 5 años

That the problem is that the display is wrong

joseluisgonzalez

22

hace 5 años

Thank you tobiastv, when I watch the video I am inclined to think that the tcon is the problem, I doubt that it is the fisplay because of the Flexes that connect with it in very good conditions, I support me with the diagram to review this tcon

joseluisgonzalez

22

hace 5 años

Thanks telso, apparently if it's on the tcon card, check Flex from Main to tcon and it's fine, check voltages on tcon and apparently they're fine, but I'm missing the diagram to ratify all the voltages, if you provided me with the diagram of the agrarianness

TobíasTv

13.721

hace 5 años

Hi Telso Darling, Jose, I collaborate with a video
https://www.youtube.com/watch?v=5TKUISAuDRA
I leave you two likes of luck :)

TobíasTv

13.721

hace 5 años

it's true, my like goes

TobíasTv

13.721

hace 5 años

maybe it can be fixed

TobíasTv

13.721

hace 5 años

It is new, yesterday I fixed one like that but it was bgh brand
going back to the topic, two questions
1 do you have an oscilloscope?
2 you can show an image of the TV with video to better understand the fault, I am interested to know if the lvds information reaches the panel, so the oscilloscope

joseluisgonzalez

22

hace 5 años

If I have an oscilloscope at what point do I check the lvds signal?

TobíasTv

13.721

hace 5 años

So what happened to you?

TobíasTv

13.721

hace 5 años

look at the first minutes indicate the measurements of the lvds pairs
https://www.youtube.com/watch?v=AF3MRfHY4R4

joseluisgonzalez

22

hace 5 años

Thank you Mr. TobiasTv, the video helped me a lot, check the lvds signal and if it is present at the exit of the tcon card, voltages are also good, the conclusion is a display in poor condition.

TobíasTv

13.721

hace 5 años

I uploaded the code on the display board, maybe we'll find it back :)