hace 5 años
Of course, I would start by measuring all the tensions of the source. You can have 3.7v but you should also have 12v 5v and maybe some negative source. If any voltage is missing it is possible that the fault is in the source plate. If all the tensions are there then as the partner says it could be the Main. Check those things and comment. regards
¿Realmente quieres cerrar esta reparación?
Sí
No
¿Realmente quieres reabrir esta reparación?
Sí
No
¿Realmente quieres borrar este post?
Sí
No