⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
LCD TVs - LED

VIZIO brand TV, power supply has no standby

Oswaldo Tercero
hace 5 años
hace 5 años
Good evening. I'm checking a power source of the mentioned tv. Check all components without power, none in short, open or altered. Then I connected it to the voltage and in the integrated controller (TEA1733) there should be voltage + B: 20 volts on pin 1, pin 2 is negative. The problem is that the voltage is unstable between both pins: 20-23 volts. The IC will be in poor condition or the fault is sought elsewhere. TV model: E601i-A3E. Thanks for your suggestions.
julio2009
julio2009
1.094
hace 5 años
hace 5 años
Hello, Here is a typical source of the TEA1733 and has the typical intentions to seek AzwiP3H.jpg [240.64kb]
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis