Hello colleagues! It turns out that this TV does not turn on or the standby LED, the source is working in parts, checking I found the PC130 capacitor cut in half which generates a spark when connecting the TV to the 100VAC line, I want to know if someone knows its value to be able to replace it, it is just the one that is located between PC3 and PC4, beforehand grac ias.

Hello Friend, sorry for the delay. I tell you, some time ago I got the same TV, same type, same model. Apparently the capacitor failure is quite recurrent, since, I had the same problem, the TV did not turn on and there was less voltage at the output of the power source. Well, I told you, I saw if I had the 220V on the PCB and at the entrance of the Trafo, if I had them, but at the output there were zero volts, so I unplugged the TV, and I started checking the output and I realized that the Traffic was short-circuited and with zero resistance on its output, for a moment I thought it was the bad traffic, but no, I isolated the output of the traffic from all of the following and it was fine, I isolated the output diodes (PD6, PD7, PD8) .. and they were good, I disconnected the filter capacitors (PEC2, PEC3, PEC4) .. they were also good, the short-circuit continued so I dismantled the capacitors PC129 and PC130 and voila, PC129 was short-circuited, I changed it for a 0.1uF / 50V tantalum worked great. I thank him who mentioned the 0.1uF capacitor. I attached an image to guide you better. As additional data: the output voltage of the standby traffic is zero and in operation (before the diodes) is 13.3Vac and 12.9Vdc after the diodes, the PCA6 capacitor 470uF / 16V, the fuse is 2A, the long capacitor that is close to the traffic is 68uF / 450V. Greetings to all.

a question the smd capacitors pc129 and pc130 both are 0.1uf., because I have the same problem with that same model I hope your answer thanks.

Friend I of you would look for LCD or damaged cards that use this type of condenser of the same thickness and try it

Can someone help me with this same model? I need to know the voltages of the Yellow Transformer, the large one with the PT1 code, the secondary outputs, how many volts are the ones delivered? prior to Transistors PD6, PD7 and PD8 ... Because I have one that the source has burned and no longer turns on.

Good afternoon friends, I am going to give you the problem that they mention with the PC130 capacitor, how bad it is that voltage is because above they mention 0.1mf but the voltage is supposed to be 16v or not?

Just now I had the same problem with my TV, I will perform the steps of the review and repair to see if I can revive my TV. I will confirm how I went with the solution.