⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
LCD TVs - LED

thomson40fs3246c eeprom dump

aziz
aziz
33
hace 5 años
hace 5 años
hello any friends give me the memory dump eeprom sg3525an for main card 40MT10L1-MAG2XG thanks
TobíasTv
TobíasTv
13.721
hace 5 años
hace 5 años
Hi, I found this on a Russian page, see the specifications, maybe it's the one you're looking for THOMSON 40FS3246C Chassis (main board): 40-MT10L1-MAE2XG THOMSON 40FS3246C MAIN-40-MT10L1-MAE2XG EN25Q64 24C32 PANEL-LTA400HM05 Source http://remont-aud.net/dump/lcd_pdp_tv/thomson/thomson_40fs3246c_shassi_main_board_40_mt10l1_mae2xg/256-1-0-45686 don't worry, I downloaded it for you;) https://www.yoreparo.com/tv/televisores/lcd/led/manuales/5913663/firmware-thomson-40fs3246c regards Tobias TV
aziz
aziz
33
hace 5 años

friend a question that where the dump that has given me in flash or eeprom is loaded. because the main one has two a flash and another eeprom thanks

Responder
TobíasTv
TobíasTv
13.721
hace 5 años

Hi Asis, look what weighs, the archives of the nand are hundreds of megabytes, if it is light in the eeprom, always in a virgin, the original keep it back up just in case

Responder
TobíasTv
TobíasTv
13.721
hace 5 años

notice if it fits in the 25Q64 of which it speaks in the data of the TV

Responder
TobíasTv
TobíasTv
13.721
hace 5 años

is the one that is close to the micro

Responder
aziz
aziz
33
hace 5 años

but that 25Q64 is the flash right? and there is one near the port hdmi puts 24c .... that the eeprom

Responder
TobíasTv
TobíasTv
13.721
hace 5 años

If it's flash, I thought you were telling me about the nand flash, excuse me

Responder
TobíasTv
TobíasTv
13.721
hace 5 años

24c is eeprom, they know how to use it for ports

Responder
aziz
aziz
33
hace 5 años

The dump, what. You have given me the method in both of them. Is nothing wrong?

Responder
TobíasTv
TobíasTv
13.721
hace 5 años

I would put it only in a virgin 25q, I would save the original one for Backup, are you sure if your problem is firmware?

Responder
aziz
aziz
33
hace 5 años

friend that I go crazy with that TV that the t-con has all the voltages and the main board I bought it new and I still don't see anything there is no video if you know something you help me thanks

Responder
TobíasTv
TobíasTv
13.721
hace 5 años

Hello, I will try to help you, if you have t-con with two flex to the display I suggest this practice
I will indicate a practice, always very carefully and fiddles with the unplugged TV
try disconnecting one of the two flexes that go from the t-con to the display and test if you have an image in the middle of the screen, if this does not happen connect it (eye, well connected) and disconnect the other and try again, if you see image in the middle of the screen is the bad display, I can indicate a practice to solve it in the best case

Responder
TobíasTv
TobíasTv
13.721
hace 5 años

I understand that the backlight turns on, eye

Responder
aziz
aziz
33
hace 5 años

t-with built-in display with two tapes the backligt on and when it passes 20 minutes there it turns off and stays with red light

Responder
TobíasTv
TobíasTv
13.721
hace 5 años

do you have sound? Do the lvds signals reach the tcon? The tensions of the source, are they all? and stable

Responder
aziz
aziz
33
hace 5 años

when I connect dvd to the TV if there is sound but with hdmi and vga not only with cable that has a lot of pins. source voltages are 23.6v and 3.2v what I need is to test signals. I tried the t-con with a lcd tool tester I do not know if you know it or not. And I get the colored bands with thin vertical stripes. And another thing when I turn off alone almost 20 minutes when plugging it with the button does not turn on it stays locked I have to remove cable and return to put it in. I don't have an oscilloscope to measure signals that very expensive. I'm going to mount a probe.

Responder
aziz
aziz
33
hace 5 años

friend that I've seen an eeprom memory on the tecon card that has its dump is 24c64wp

Responder
TobíasTv
TobíasTv
13.721
hace 5 años

Aziz, I suggest you open a new question explaining the failure of the TV so all colleagues attend, this topic is closed and nobody will review it

Responder
aziz
aziz
33
hace 5 años

OK thanks

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis