Good community, I tell you that a 32-inch 32lb560b TV with the damaged LED strips came to me, due to the few existing and scarce spare parts in my country Venezuela, eh opted if it is possible to adapt some led of a damaged car led bars which are 3 volts, that TV uses 3 strips, and each one uses 6 LEDs in total are 18 LEDs in series, its source card has output for 117 volts per 250mA, which means that each LED receives approximately 6 volts , I have other LEDs that work with 3 volts, summarizing, how can I do to lower the output voltage in half so as not to burn the 3 volt LEDs or if it is preferable to look for the original LEDs