⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
LCD TVs - LED

problem with daewoo 32 LCD tv

guancho jean
hace 5 años
hace 5 años
Greetings fellow forum I have in my workshop a TV of the brand daewoo lcd 32 model DLX-3C1 which is not seen half of the screen proceeded to uncover it and I got several electrolytic capacitors of 1000ufx25 the canbie and the continuous fault I already checked all the voltages of the source and they are ok any help on this fault I will be very thankful and birds is distorted greetings
ELECTRÓNICA FCJ VENEZUELA
hace 5 años
hace 5 años
Check the flexes that connect the tcon with the panel and perform it keeping, greetings.
guancho jean
hace 5 años

Hello fellow I commented that reviewing the flex of the tcon in contre a flex that seems aver had a short because it is black and perforated that I can do in this case greetings

Responder
ELECTRÓNICA FCJ VENEZUELA
hace 5 años

Replace the flex, and verify why that short film you say occurred.

Responder
guancho jean
hace 5 años

Greetings companion as I can change that flex if the flex I say is paid to the panel and something else after I checked the TV I turned it on again and this time it turned me on with the perfect image but after 20 minutes on the fault appeared again

Responder
ELECTRÓNICA FCJ VENEZUELA
hace 5 años

If the tcon is built into the panel, you cannot change it.

Responder
guancho jean
hace 5 años

Ok partner I understand I want to thank you for all your contributions I learned a lot about this fault and I will close this post greetings

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis