⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
LCD TVs - LED

hitachi 32cdh-le32fd18, the LEDs burn

laloarnedo
hace 5 años
hace 5 años
Hello friends, I already had this TV and I changed one LED, another month, and now it came back, it has another burned out, this is an original of the device, what could it be? , and it could be lowered, the supply voltage, taking away some resistance ?, if someone touched him, this tv with this fault, greetings, thanks
RickMoro
RickMoro
1.935
hace 5 años

When replacing the burned led, you should take a voltage reading that reaches the led strips and check if the voltage supply corresponds to the amount of led (taking into account if they are in series or parallel).
You should also check the status of the capacitor that filters that current to the LEDs.

Responder
laloarnedo
hace 5 años

Well, colleague and fixed, regards

Responder
seekude
seekude
2.085
hace 5 años
hace 5 años
Yes, you can do that, you remove resistance between source and gnd of the backlight return mosfet. regards
laloarnedo
hace 5 años

ok I look, and comment, thanks

Responder
laloarnedo
hace 5 años

hello .quite 2 of the 3 resistors, which are r20.and stabilized, I have 2.9 to 3volt, by led.and the device has not returned yet, thanks

Responder
Zacarias J. Candia
hace 5 años

hello can you tell me which resistors did you get please

Responder
Zacarias J. Candia
hace 5 años

I need to reduce the voltages towards the LEDs but I don't know what resistance to take out

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis