Good morning colleagues from the forum, I am requesting your help to repair the described TV, the flaw that it presents is that when you turn on the image appears and after a few seconds the lamps go out but the video remains, when checking the voltage output of the board inverter that goes to the lamps the voltage appears when turning on and seconds later disappears, but the voltage input of the inverter remains present, this made me suspect that it could be that some of the lamps were causing over consumption and that is why they turn off, but there is a behavior that stopped me from uncovering the screen to check the lamps and that is that by heating the inverter plate that is responsible for providing the voltage for the lamps, the TV stays permanently functioning normally; Now I have the certainty that the inverter plate is damaged but I can not get another one, so I would like to know if there is any way to replace that inverter plate without having to change the lamps and that the TV continues to work. I have some images to better illustrate the question, in advance I am very grateful, see you later. 1.jpg [2.07MB] 2. attach / attach_25.png [/img] 3.jpg [2.28mb]