SAMSUNG SMART TV 48 INCH. MOD. UN48JU6100 double magnets
Colleague Franki could not see the points that you indicate to me clock and start of any of both sides of the Flex of the tcom, but I decided to cover with tape one of the Flex on the right side from right to left from pin 16 to 21 .
I throw the following result, covering pins 16 and 17 I no longer had a double image, but if the left side of the screen turns dark but the image is appreciated although dark.
Your collaboration is very acute, but I don't know if that part can be corrected.
Cordial appreciation for your collaboration.
Friend that is because you are covering 2 different signals, you must cover ckv and ckvb of the same signal, here I explain to a colleague how to do, read here until the end https://www.yoreparo.com/en/tv/preguntas/ 6148688 / samsung-un46f6800-screen-gray. I hope it helps you. Comment results. Greetings and luck
Greetings again, Franki.
I tell you that I could not or do not know how to upload photos is that I use my cell phone. And I don't know if it can't be done from the cell phone.
I could not find the two correct clock and start signals of the damaged cof. Because in the Flex of the tcom they are not marked, or because they are very small letters I cannot see them. But as we achieved thanks to your contribution partially correct the fault, and my client is desperate for his TV, in the image menu I put it dynamic, and without saving energy, to keep the image clearer. Thus the darkness of the image is less appreciated.
The client decided to see it as well as it was.
I will give as the best solution to close this pog. Thank you.
Ok friend, read the post that I indicated to you so that you have a more exact reference of the fault and it will serve you for future repairs since these TV models are falling by quantities. Greetings and luck
