samsung.png source circuit [721.12kb] hello lcolegas. I tell you that I have a 32 "samsung lcd mod Ln32r8 that came to me without turning on stb led light. Take out Bn44-00192a chassis source, I noticed that I had a lot of concentration of dirt and dirt. I cleaned it, reinforced the welds and the television tries to turn on now . it turns on blue acrylic light for half a second and then the television is in standby with the difference that the light flickers for seconds. Turn on a few seconds and turn off and so on. I check the source and I can't tell which component is more, I don't have short transistors or open capacitors. However, when the TV is on, a small shriek is heard, almost imperceptible. With the help of the Sanfalla member, I managed to start the source manually and ready for the main. In this way I have taken the measurements that I detail in the diagram that I leave attached. I have neither 24 nor 12 goes the outputs I have reviewed almost all the components and I cannot find the fault Any help is welcome and I hope I'm not so heavy on the subject, I want that television for me. thank you very much to all.