I got a samsung smart tv un40j5200af that turns on well and turns off after 30 seconds approx the timer is not programmed, it turns back on normal and turns off again as many times as you turn it on, the client indicates that his son could move some did it work with the remote, if you could guide me to locate the fault, I even put a factory reset and it remains the same, or do you think the firmware can be reinstalled? Thanks in advance and God bless you greetings from Salinas SLP Mexico

I already checked the cable of the source and it is okay to even clean it with isopropyl alcohol and nothing, I lean more towards memory, but here it is not possible to get new. The only option is to look for a used main card, but I wanted to leave it as the last option. Do you think there is another solution or how would you try to get it?

The fault is thermal, or some bad welding ... If you get the firmware you load it with a recorder

Disconnect the connector from which it feeds the main, and charge with little lights, to find out if it's a source

[quote="luisrode"] Disconnect the connector from which it feeds the main, and load with spotlights, to find out if it is a source [/quote] I already checked the source and there is no variation working or when it is turned off, load with light bulbs? I didn't understand what you mean?

[quote="luisrode"] The fault is thermal, or some bad welding ... If you get the firmware you load it with a recorder [/quote] I think it's too short for heat to protect itself, and where could I get the firmware?

Chapo works at Samsung Shorty !!! Firmware delivery

In technical world, Info the page has problems to work now, there to look for it

[quote="luisrode"] In technical world.Info the page has problems to work now, there to look for it [/quote] ok, I hope to see if someone has the firmware and could provide it to me and / or tell me the page to download it, in advance thank you

[quote:ac55c47af8="chapoescobar12"] is not that it is negative but centered but they will excuse me for this .... how will they load a firmwere to a team that does not last more than 30 seconds on ???? ? [/quote:ac55c47af8] You're right, I had not thought about that, so I will have no choice but to get the main ??? thanks

I know, I forgot to tell you that, do not try it because there you get screwed and it won't start you anymore if the process is interrupted. It has to be with the memory removed outside

Shortest path (main New) Or search the .Bin to load the memory

[quote="luisrode"] I know, I forgot to tell you that, don't try it because there you get screwed and it won't start you anymore if the process is interrupted. It has to be with the memory removed outside [/quote] another comment ,, I have a 32 smart main, you recommend me to try with the memory or it could damage my main that is 40