⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
LCD TVs - LED

lcd tv NOBLEX model 32lC841HT - Turns off at minute

javocur
hace 5 años
hace 5 años
Hello, I have this TV about 6 years ago, a year began with the typical failure to blink a few minutes and then already work properly. Some time ago it began to take longer to stabilize, and it took 1 hour last time. Now it only turns on 1 minute and turns off (It has audio and video with flickering). I measured the source voltages and they are correct. I previously changed all the capacitors. I read in another post that I tried to unplug the lamps because the same connectors could leak and cause the shutdown and, effectively, unplugging them does not turn off. Is it all about the same induction problem? Any suggestions? Thank you!
Guillermo Aguirre2012
hace 5 años

It seems that the lamps have already completed their life cycle, their durability with the TV working often is 5 to 6 years, you must change them

Responder
Kastell.
Kastell.
3.058
hace 5 años

Exactly corroborate what he tells you, Guillermo Agu
That that problem of your TV, now, since the problem of the source you solved it. Greetings and luck

Responder
javocur
hace 5 años

Hello,
He never really had a source problem.
Can the lamps run out in 13k hours (average of 6 per day)?
Thank you!

Responder
javocur
hace 5 años

SOLVED:
I made the Faraday cage that is mentioned in other posts and both problems were solved, they were not exhausted lamps but the induction that leaks into the platelets.
Thank you very much everyone for your time.
Until the next repareta :)

Responder
Kastell.
Kastell.
3.058
hace 5 años

Good Morning. javocur, I do not doubt his honesty God free me, but I do not believe it, if a CCFL is intermittently leaking, by chance it worked for you, but remember that sooner rather than later he will live to fail, until you change the lamps, the possible waves that you have around you, in any of the ways they can enter the Modules, platelets that you say about the TV, I repeat in any of the ways they can create induction in circuits of this TV

Responder
Kastell.
Kastell.
3.058
hace 5 años

and alter its functioning, what you say is like, believe as they say that God created the world in 6 days and the seventh rest. Box is scientifically proven that that is not the case. In your case, it may be that you went over, some welding or changed some other capacitor, and at the same time you made the famous (Faraday cage) and by chance it was put into operation, you are still on time if you remove the cage, and connect the TV will work% x%
one hundred by one hundred. Please do not try to go crazy. (Better to ignore some comments)

Responder
javocur
hace 5 años

Kastell,
It is not a matter of cold welding (since I did not review any welding) or of capacitors since the source gave all the perfect voltages.
It is no accident that the rest of televisions have a whole metal chassis, this model has the failure to have almost all plastic.
Notice that in this same site there are no less than 4 posts solved with that.
Another person was leaking in the lamp connectors and solved it by placing heat shrinkable.
Watch this video if you don't believe it.
https://www.youtube.com/watch?v=dr5NZrIYFeA&t=1804s

Responder
Kastell.
Kastell.
3.058
hace 5 años
hace 5 años
You have problems with the LED strips, you have to change them all. Not only the melts.
javocur
hace 5 años

Hello Kastell, there is really no reason why they light a few minutes. Thank you

Responder
Kastell.
Kastell.
3.058
hace 5 años

Hi Javocur
Does the screen light up for a few minutes, this does not mean that you do not have a blown lamp? When you open the panel you will find some melted or semi-molten, then the protection detects the consumption and disconnects, the TV.

Responder
Kastell.
Kastell.
3.058
hace 5 años

If the TRC Filament could be replaced in the TRC, this TV would look again as the first day, but this is not possible, however, with the new Led TVs if we can replace the “filament = LED lamps” Do you understand now?

Responder
Kastell.
Kastell.
3.058
hace 5 años

It depends on the manufacturer, some last longer and others less, but yes, making normal use at that time they are, to fall.
Those of our bathroom, are also Led lamps and before the year of use, they fall.
The real architect of these new TVs is the Panel Display and this, fortunately, lasts several more years, I would say between 15 ... 20 years.

Responder
Kastell.
Kastell.
3.058
hace 5 años

Example: between LED lamps and Display, it is the equivalent to CRTs (heating filament = LED lamps (Internal TRC mask = Display).
If the TRC Filament could be replaced in the TRC, this TV would look again as the first day, but this is not possible, however, with the new Led TVs if we can replace the “filament = LED lamps” Do you understand now?

Responder
javocur
hace 5 años

They are CCFL not LED in this model but I imagine you knew it, and it worsens even the panorama :)
Ok Kastell I will go that side that you comment and comment something.
Thank you!

Responder
javocur
hace 5 años
hace 5 años
The solution in this model is to make a faraday cage.
Kastell.
Kastell.
3.058
hace 5 años

Good to everyone, it seems incredible, but it is true, there are still, people who believe in the virginity of the virgin. That I remember at the beginning of my studies of electronics in the 60s (1960) I have always studied that the Hercian waves are transmitted by a transmitter (transmitter) and are received by (Induction) well said, thanks to a tuner radio and (tuned) at that frequency and as far as I know the platelets (as you say they do not have any radio tuner) nor do they have tuned coils, at the frequency (X) what happens by chance, your TV incorporates all these properties)

Responder
Kastell.
Kastell.
3.058
hace 5 años

Searching a little and remembered exists, the phenomenon of induction, but for this to happen you have to be very close to the inductor field, I do not believe that you live next to a Nuclear Power Plant.
Best regards friend from Madrid (Spain)

Responder
javocur
hace 5 años

Have you seen the video or not?
Have you ever played an electric guitar near a monitor, a TV or a fluorescent tube? Nor is it a radio and I assure you that a noise is coming from that same phenomenon, call it induction or whatever you want.
It seems to me that continuing with this issue does not contribute anything when the solution is given, do you want to come to my house and show you the phenomenon you don't believe in?
Regards

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis