gabriel.bio

82

hace 5 años

Hi Adrian4, for what you describe it is feasible that it is the capacitor, usually of 470 uF x 400 v. Following the circuit is at the exit of the diode bridge. I uploaded a photo of the board to be able to guide you better

adrian4

119

hace 5 años

give it, then I upload, thanks

adrian4

119

hace 5 años

Hi Gabriel.bio, I have the photo but I can't find where to attach the file

adrian4

119

hace 5 años

there I could

adrian4

119

hace 5 años

the only power I see connected directly to the motor pins is an SF 2060 and an SL 30N60 the sf I think they are diodes and the sl I create a fet, the capacitors you tell me are 220mf x 400v

gabriel.bio

82

hace 5 años

Sorry for the delay, I do not see any image I thought it was something because I was seeing it on the mobile but on the PC I can not see it either. It may be those of 220Uf / 400V, these should be connected to the 4-diode bridge and this diode bridge to the voltage input pins of the mains (220VAC or 110VAC)

adrian4

119

hace 5 años

Hello people a few days ago I solved this problem, motor winding and walked away, it killed me with blows but it was a bad spin, thanks for the help ..