⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Welders

Jbc 14st welder problem

Fernando Zapata Lahuerta

hace 5 años

Hello good I have a soldering iron jbc 14st heats up but not enough to melt tin worked perfectly before changing the tip for a new idea that could help me and tried several tips and still the same if it didn't work shouldn't it heat anything up? Thanks for the help

Comentar

joivarse

hace 5 años

It may be the quality of the tip, since you say that with the previous one it worked well.

Comentar

Fernando Zapata Lahuerta

hace 5 años

And tested with another tip are original jbc



Responder

joivarse

hace 5 años

If you are mounting the specific tip for that model ?, these are the compatible tips for that welder:
- JBC TIP B-03D 0.5mm specific for SMD.
- JBC TIP B-05D 1mm
- JBC TIP B-10D 1.5mm
- JBC TIP B-40D 3x1.5mm
- JBC TIP C-03D 0.5mm specific for SMD.
- JBC TIP C-05D 1mm



Responder

Fernando Zapata Lahuerta

hace 5 años

Well tomorrow I confirm but I am almost 100% sure that if I believe that the ones I tried are 0.5mm and 1mm thanks



Responder



Fernando Zapata Lahuerta

hace 5 años



hace 5 años

Confirmed original tips jbc any ideas but thank you very much

Comentar

joivarse

hace 5 años

It only occurs to me that at the time of changing the tip the crockery that heats the tip has been damaged as such, it would be to disassemble the entire bonnet and make a complete check



Responder