⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.🔥 Aprovechar oferta ahora 🔥
HELLO, the grass cutter capacitor burned. It is 16 microfarad 250vac, 4 pins as seen in the photo. I went to the hardware store and they gave me one with the same specifications but with two cables. How do I connect it to the new one? They told me it was the same. There are the photos. Thank you People IMG_20171204_172853.jpg [1.81MB] IMG_20171204_180150.jpg[1.74mb] IMG_20171204_172844.jpg [1.97mb]
Hello how are you doing? indeed they are of the same capacitance and voltage the only thing is that you bought a capacitor with wires and the one that had original is with pins or terminals type male. The bad thing about this type of capacitor is that you have to remove the terminals that have the cables and connect cable-cable, in this case from what I see in the blue and black image the splices to one of the capacitor cables you bought and the another cable that is only connected to the other end of the capacitor cable greetings
Hi. The original capacitor is not double but it has two connections (like the new one), only "duplicates". In your case, join or connect the black motor cable with the blue one and connect it to one of the cables of the new capacitor. The other cable of the new capacitor is connected to the orange of the motor. That would be all. regards