⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Hand Power Tools

Black & Decker drill / drill

HALOGENO
HALOGENO
110
hace 5 años
hace 5 años
Good evening friends of the forum: I have a black & decker hand drill that has two faults / problems, the first is that the rotary hammer mechanism is constantly engaged and cannot be controlled from the knob that is up for this purpose and second is that it factory had speed regulation With the trigger and using it so much, a little plastic piece was released and no longer regulates the speed, it just starts and spins at full power. I would appreciate help on this topic. Thank you.
cristian-k
hace 5 años
hace 5 años
Greetings ... The problem of the broken-firing pin, is due to two things, normally, 1- the system that sustains the change of function was released or unadjusted, in some it is a steel ball, which fits into a slot or hole, in others it is a cam that separates the percussion system ... 2-and is wear and tear by use in the components qt mensione .. Normally they are obtained in service points of the brand or in repair shops .... The switch of speed regulation, I advise you to change it, it is not expensive, and you go to the fixed, since it is usually repaired and returns to the same ... Greetings ... Comment ...
HALOGENO
HALOGENO
110
hace 5 años

Thank you very much cristian-k, I'll see how I do it,

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis