⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Hand Power Tools

Thermofuser resistance is bursting

Maxigasparrini

hace 5 años

20180206_213652.jpg [7.06MB] Good afternoon I have a mod system acua termofusora ATS2001E I was walking, it goes out, it doesn't work anymore, the disarmament had the resistance burst, I change the resistance, it comes back to reach the maximum temperature and it bursts again, the resistance, I don't know what can be done, the machine was used 4 or 5 times.

Comentar

Maxigasparrini

hace 5 años

The one that had factory says 2E
335K
And the one that was sold to me that when I put it on, I also sell it says Cl 21
475: 400v



Responder



servimat1

138.835

hace 5 años



hace 5 años

Hi. What resistance is burning? Upload a photo of the area. regards

Comentar

Maxigasparrini

hace 5 años

Excuse me but I'm new and I don't know how to send the photo I go crazy thanks as soon as I can send



Responder

servimat1

138.835

hace 5 años

Here I leave you how to upload photos.



Responder

servimat1

138.835

hace 5 años

What is the resistance that burns? Upload a sharper photo showing which one it is.



Responder

servimat1

138.835

hace 5 años

This is a capacitor and not a resistance. Mention that the capacity and voltage value is what you placed.



Responder

Maxigasparrini

hace 5 años

Hello, you had asked me how much was the capacitor that I had placed I tell you what was coming from the factory says 2E 335k
And the one who sold me says CI 21 475: 400 v
That too I burst so I don't know



Responder

servimat1

138.835

hace 5 años

I already look at the plates I have and give you the real value. I'll see why it could burn too. Respond to this with another comment so the system notifies me and I do not forget to leave you the value. regards



Responder

Maxigasparrini

hace 5 años

Thank you very much, I will wait for the answer



Responder

servimat1

138.835

hace 5 años

I regret to inform you that the plates that I have seem to be of another model since they do not bring that capacitor. I leave you an image of the ones I have. Upload a picture of your component side board to see why the capacitor burns.



Responder