⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Brushcutters (or Brushcutters)

Electric edger

Ezequieloga
hace 5 años
hace 5 años
Good evening ... I have a question, I have an electric edger that makes a considerable spark where they touch the coals ... I already cleaned with a thin line and new coals ... What could it be? If I use it like this, will it be broken at all? Thank you
Germàn LB Service
hace 5 años

Dear, if the spark is large or getting worse, it may be the short-circuit induced, there is no turning back, at any time it stops working.

Responder
servimat1
servimat1
138.835
hace 5 años
hace 5 años
Hi. Possibly and by use the armature has been shortened. What you can do to test is to clean between the collector's thinner with a very sharp tip. regards
Ezequieloga
hace 5 años

I will try and then I tell you what happened ... Thank you very much

Responder
Ezequieloga
hace 5 años

Keep making the same spark ...

Responder
servimat1
servimat1
138.835
hace 5 años

Then the armature would be short. You can replace it without problems. There are many winding houses that make spare parts. You wear the damaged one, you pay a difference and you get another one repaired.

Responder
Ezequieloga
hace 5 años

Thank you very much for your time!

Responder
servimat1
servimat1
138.835
hace 5 años

Nice to help you. regards

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.94
(16)

Curso Refrigeración Comercial Aplicado a Diagnóstico y Reparación

Ing. Georga Melgarejo
$ 40 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis