⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Brushcutters (or Brushcutters)

Brushcutter does not start

GabrielFabricio
hace 5 años
hace 5 años
Good morning, I have a 4-stroke honing machine and it doesn't start me. I changed oil and cleaned spark plug and nothing.
martin villegas
hace 5 años
hace 5 años
gabriel: check that the spark reaches the spark plug, disassemble it and connected the body of the spark plug ground to the chassis ground with a wire, the electric arc (spark) must be formed between the terminals, if it forms, check then that the fuel arrives, if it is not formed then you have to change the high voltage winding, (which is the car coil) that is connected to the spark plug by the cable greetings and comments
GabrielFabricio
hace 5 años

I already fixed it, it had a very folded sleeve and did not allow a gasoline pass. Thank you very much Martin

Responder
martin villegas
hace 5 años

I congratulate you a hug

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis