⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Security cameras

install dome on exposed brick

paco
paco
2
hace 6 años
hace 6 años
hello I have a question, I have to install a dome in a front of a garage with exposed brick, where they recommend putting the tarugo on the brick or on the cement joints ?, the logic says about the cement unions..but the The issue is that there would be a part of the screw outside the tarugo and outside the camera .... and if I install it on the brick it could damage it and generate a fissure where water enters. This is outdoors. Thank you.
Filipo
Filipo
256
hace 6 años
hace 6 años
Hello Paco. It is safer to place the tarugo on the brick than a mixture. It should not break, unless you use bolts thicker than those tolerated by the plug, so that they exert a lot of pressure and produce a crack. It would be advisable to drill with a thin widia wick first and then enlarge it with the wick corresponding to the tarugo you are going to use. To avoid leaks you can seal with silicone. Regards
paco
paco
2
hace 6 años

Hello Philip, thank you very much for your answer, I will go for that solution, first thinner wick and then the end and before putting the card send silicone, .... and I will put silicone up in the union of the camera with the brick so that no water passes down.
I really appreciate your time and your advice.
regards,

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis