Check PC1832 zones
I would like to know how to handle them, because I added the RF, but the keyboard only marks me 8 zones (in * 85555 202) which is where I activate and deactivate
In section 202, you enable zones 1 to 8. In 203, 9 to 16, In 204, 17 to 24 and 205, from 25 to 32.
Thank you very much, alpaseguridad, you have an idea if with the rf5132 I have 32 zones or how many you add (obviously wireless), Thank you
The Panel can be expanded up to 32 zones, wired, wireless or mixed. The wired, with expanders and wireless with receivers or receiving keyboards. You must take into account the scope of the detectors. We are at your order for any question.
Greetings.
I have a distance of 12m, the sensor is ws4904, you say it goes? And another thing how is the installer code issue? In need to change it? None inside the house will change anything, thanks
The manual explains how to check the reception quality of each detector. The codes are at your discretion whether to change them or not.
Give it, if I don't fuck you, give me a hand with the issue of putting the phone https://www.yoreparo.com/es/seguridad/alarmas/preguntas/6267762/conectar-telefono-a-pc1832
but I also put it here:
-301 Phone number you want me to call you
-303 Second phone number
-320 enter here what I put?
-350 enter 06 and 06
-380 leave on 1, 5 and 6, leave with #
what I need is to sound when the alarm sounds and not when activating each sensor, thanks
Section 310 - Enter an account number. Anyone.
311 - The same.
320 - Nothing
There is a general misconception. Each sensor is not activated.
It activates, deactivates, triggers, calls, etc. THE ALARM SYSTEM. That you have connected all the detectors or devices you want.
The zones that you want that do not generate you shots during the activation, must be canceled before activating the System. It is understood?.
Greetings.
¡Aprende a reparar con estos cursos YoReparo!
Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
