Help with a dsc pc 1832 alarm
Yes friend I understand but I say that delay time 2 is not necessary since the same one that you call garage door can also assign another value in this case 01 delay 1 that is, it could remain z1 01 z2 01 and both would have delay . So how can one or the other be used?
I think the one who doesn't understand the concept is you. Respectfully. Is not the same. If to enter through the garage and disarm you need 60 seconds and put that as delay 1, whoever enters through the front door has too much time. It's just commenting since it's fixed
Friend I insist you still don't understand me. I'm not talking about putting the time of entry 2 at the front door. (To get to the panel)
What I say that the entry delay 2 is not very useful since if I wanted to leave a garage door with delay I arrive and go to section 001 and enter zone 2 with the value 01 (delay 1)
That is, there may be z1 01 z2 01 and both zones will have time, that is, the
Delay time 2 would not be occupying it.
That's what I mean, I hope you understand me.
Exactly I imagined that delay 1 and delay 2 could be assigned to the same area but one actauaba in ABSENT and another in PRESENT.
That was my confusion, but finally what I wanted to do I could not achieve.
WHAT WAS TO LEAVE ZONE 1 In leaving mode AWAY WITH DELAY 1 and MODE PRESENT INSTANTLY.
In the end I left both with delay
Hello friend, thank you for responding, regarding what I want to achieve by leaving zone 1 in a snapshot in PRESENT and with a delay in ABSENT I already had the alarm in that way but it turns out that by force majeure I had to reset the alarm and that configuration was lost .
Now with regard to delay 1 and delay 2 I find no sense to leave it for door 1 and door 2 since both zones can be configured with delay in example definition: leave Z1 in 01 and Z2 01 and both would remain with delay or am I wrong?
So I do not understand what is the purpose of delay 2? What is 02 in definition?
Hello dear first of all thank you very much for taking the time to respond.
Look, I tell you ...
I have only inner sensors none outside.
Before I reset the alarm I had the alarm in that way as I want, that's why I ask it. Everything is fine as I want, I only have problems with zone 1 that is from the access door.
In ABSENT it works as I want to say, it gives me the exit time and gives me the entry time.
But when I am at home and I want to activate it in the PRESENT mode when opening the access door, that is, ZONE 1 works as absent with delay.
you have to activate it with * 9 to work as you want, what you probably had co-configured is the function key with the armed of * 9 instead of PRESENT mode, see the configuration of function keys in section 000 and the configuration what I tell you is 05, try it for sure is that
regards
Andrew
Will it be any problems with the partitions? Sorry for the ignorance but I don't understand much about the partitions
You have to read the manual, the part of the keyboard function key, and the one armed with * 9, it is the function you are looking for with the features you describe in your query, so you program it and you can try it, let me know how it went
No friend I want to do it with the present key not entering any eating but finally leave it that way.
PRESENT: with delay
ABSENT: with delay
My idea was to keep it that way
PRESENT: instant
ABSENT: with delay
Since before the alarm was like this
The delay is correct, just need to change the function key that is normally PRESENT would change from 04 to 05 so that when you activate with that key the alarm eliminates the entry time and remains as a snapshot, it is the same as activating with * 9 that does the function key, let me know if it gets complicated with that, but it's in section 000
I don't understand you, my friend, could you give me details of the effect that causes these parameters and the steps to get there.
Thank you
http://cms.dsc.com/media/documents/all/PC1616-PC1832-PC1864_V4-2_NA_UM_SP_29007353R001.pdf
page 27
you enter programming (000) --- 2 ---- 05 programming exits
you have to keep in mind that you should know a minimum of programming I have an idea of what you are doing because in just a couple of clicks you can deconfigure all your alarm
regards
Andrew
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos
