⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Alarms
PGMW (wireless) Alonso
58
hace 5 años
hace 5 años
I just connected a Pgm W to turn on lights. I follow all the corresponding steps from the keyboard until it starts searching .... I go to the sensor, I press the button and the keyboard accepts it. The inscription on it is PGMW # 1 Recorded and below Signal 71%, I give ok and go out with an asterisk. I confirm the programming output and reset it. Now when I go to see it both on the keyboard and the IP 400 does not exist. He never took it. That could be happening? It is the first time that I do it so I may be missing something but I do not believe. Thanks for the input
Regards
Walter
58
hace 5 años
I have no choice but to tell you that you are a teacher Jorge. I did it and instantly I take it. I close the issue as solved. Many thanks. By the way I consult you. Because you put me in another post that connects phase to C and the continuation of it to NC and by catalog says NO. Thank you Jorge!
Regards
Walter
3.234
hace 5 años
I may have been wrong. My apologies Finally, you will notice right away; since if you connect it backwards (NC instead of NO), it will stay on at the moment, and it will turn off when activating the PGM .. That is, it would be the other way around.
Greetings
Jorge
58
hace 5 años
As is Jorge. For you to stay it was for NO .... Everything worked great for me thanks to your help.
Regards
Walter
¡Aprende a reparar con estos cursos YoReparo!
Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off
Yamil Alarcón
$ 29 USD
$ 12 USD
Curso Tecnología Inverter - Fabricación de probadores y herramientas
Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad