Alarm X28 807 Keyboard Remoro does not work
Alarma X28 W
Alarma X28 W
Hello Omar !! I tried but I didn't get it.
When I did it in the garage I did the same as in the central. activate deactivate and then press asterisk twice to load the new code. It is assumed that when the asterisk is pressed twice, the two red and green lights begin to flash, waiting for the new code that is loaded twice.
As well
Pressing asterisk twice the lights do not blink therefore it is as if the new code does not take me
I'm sure it's like that but let me look for some old machetes that I must have in case of doubts to be sure since it is in parallel with another (I worked it 7 years)
I will thank you very much Omar !! A big greeting and thank you very much for your attention !!
I'm sorry to tell you that I can't find the machetes I keep looking for them if I find them I'll pass them on
Hello Omar !! I make a query. How do I give the seconds I want to deactivate the alarm when entering the property? I have it with sensors of doors or windows apart from the infrared one and as soon as I enter the property when opening the door it starts to sound and I want that at least 15 seconds to deactivate me. Thank you so much
It is central, the input times are fixed and they are given by 2 capacitors that are on the plate, do the following
note that the entrance door sensor is not in an instant zone if so, pass it to the timed zone that if I remember correctly is zone 1
Now, if the sensor is in the timed zone and does not give you time, it is because the input time capacitors were removed, you look at the plate and surely they are not the same, they are 10 micro farades for 16 or 25 volts of insulation
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off
