Good friends, I am new to alarms but I have knowledge in electronics. Install an alarm dsc using three zone in a trade that has two front doors, the zones used are the following: Zone 1 (Z1 + com) 5k6 resistance in series: Door 1 (must be delayed) Zone 2 (Z2 + com) 5k6 resistance in series: Door 2 (must be delayed) Zone 3 (Z3 + com) 5k6 resistance in series: internal movement sensor (when the alarm is activated nobody is inside the trade) -I need the programming for those three zones, the alarm is unused. -the calls will be made from a fixed line to two mobile numbers (I think the GSM module is not needed?) That's all folks. If you can not refer me to any post !!

timed zones 1 and 2 and instantaneous z3: * 8 5555 001 010103 # # http://yoreparo.com/seguridad/alarmas/preguntas/924774/dsc-585-callador-telf-como-se-programa http://yoreparo.com/seguridad/alarmas/preguntas/121614/programando-una-dsc-instructivo

I do not know if you already have the rest of the programming? This is to give you time to enter and exit. From the magnetic sensor of the entrance door you must count in seconds how long it takes to get to the keyboard and if you have any sensor pir on the way that would be the second entrance. And the output would be the inverse bone of the keyboard to the door, example * 8 5555 input to programming 005 system time step 020 first input, 010 2nd input, 020 output, 003 how long the siren will sound when it is triggered, then it would * 8 5555 020 010 020 003 ##