⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Refrigerators

Fridge electrolux df45 cuts the engine at 30 minutes

christian

hace 5 años

Hello, my name is Christian, I have problems with my Electrolux DF45 refrigerator, it turns out that it marked f1 on the display, and I bought the sensor 5 hom and replaces it, the problem is that the engine starts 30 minutes (the temp.frezer does not reach -1C ° and in the refrigerator 18 C °) and then cut and start after a couple of hours.l (the evaporator works perfect -17.7c °) the forcer also works ... Already replace all the sensors and thermal fuses, send the plate to be checked and it has no damage, the two resistors mark continuity .... I changed the filter to the engine, cleaned pipe with nitrogen and charged 160grms of gas 134 according to manual. Question, is there any regulator on the plate? Waiting for an answer ... thanks! Christian from Argentina

Comentar

oviedo marcos

151

hace 5 años

Hi Cristian..your query is confusing .. First you comment that the evaporator does not reach the set temperature .. Then you comment that it reaches 17- and if so, it is good that the compressor stops at 30 minutes. This is what you propose .. No ..?

Comentar

christian

hace 5 años

Marcos, I tell you that the compressor is measured with an amperometric clamp and works 1.4-1.5 amp. The strange thing is that when we operate the freezer tube (it can be done until max 2: 30hs), the refrigerator works perfect! Does the freezer mark -11 / -13c ° and the refrigerator 5c °. Does the platelet have any digital timer or something? The sensors are new and do not mark display failure. the pad and the thermal protector also replace them.
The platelet took her to check and they told me that she had no failures, I took her to an electronics house not specialized in refrigerators ...
I don't know how to paste images ..



Responder

christian

hace 5 años

heladera.JPG [173.64kb] unintentionally delete the previous answer Thanks for the hand! [url = / ver-adjunto / aHR0cHM6Ly9jZG4ueW9yZXBhcm8uY29tL3VwbG9hZHMvZGVmYXVsdC8wMDAxLzk4L2hlbGFkZXJhIDItODA3NzMuan/ng/bng/atng/at25/atng/atch/bng.at

Comentar

oviedo marcos

151

hace 5 años

Cristian forgive me for the delay in responding maybe you already solved the problem .. Try throwing it more coolant ... Until I get to.
temperature. If you see the return freeze you will get refrigerant ..



Responder