⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Refrigerators

I can't find a solution

March De Oertlin
hace 5 años
hace 5 años
Hello everyone, I have a patric nofrost refrigerator, I change the vile metal, the platelet, regulate the thermostat, the resistance is perfect and despite all that it continues to make ice and does not let the refrigerator go cold! I don't know what else to do !!!! Could you help me???? Thank you!!!
Comentar
oviedo marcos
hace 5 años

Hi .. I ask. You say that you changed platelet .. The patrik with platelet bring sensor .. And say that you also changed thermostat .. And then you confused me. Could you be more precise ..?

Responder
March De Oertlin
hace 5 años

Just change the plate and the sensors. The rest is going well! The thermostat inside the refrigerator I raised it to 7 is still filling with ice!

Responder
oviedo marcos
hace 5 años
hace 5 años
Well .. You say you walked sensors with the control board. I have no choice but to think that the sensors are not located in the right place .. Reveal this point .. And what you call a thermostat must be the air flow regulator. Leave it in the middle ..
Comentar
March De Oertlin
hace 5 años

I swear, it's all right! I will also check everything again !!! The odd thing k where the cold should go to the refrigerator is there where ice is made by k in the evaporator works fine!

Responder
apiconauta
apiconauta
apiconauta
3.917
hace 5 años
hace 5 años
Hello March: Either you work with a thermostat or with sensors in the platelet, both fulfill the function of cutting by temperature, I do not know any refrigerator that works with both systems. Please clarify the point so we can collaborate, indicate if it is with mechanical taimer or electronic board. Luck.
Comentar
rubensiño
rubensiño
rubensiño
22.830
hace 5 años
hace 5 años
He refers to the damper if you changed everything verify if it goes into thaw it does every 6 hours lucky
Comentar
March De Oertlin
hace 5 años

Sorry k do not know how to explain the refrigerator works with electronic board! Which was already changed ... And where it fills with ice is in the air or cold passage! If I control it at 6 o'clock as they tell me, k is the thaw time and the system does not activate it ... K do ????

Responder
JORDY MELO
hace 5 años
hace 5 años
Check the duct where the water from the thaw comes out to the vessel behind the refrigerator, because if you put water in it, it freezes in the area where you say that ice forms, well since you say that everything in the freezer is normal and if I wouldn't do the thaw would be covered in ice
Comentar
March De Oertlin
hace 5 años

Thank you very much to todooos for the attention. And they answer me! I'm going to verify everything and tell you!

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos
Héctor Castiñeira
$ 60 USD
$ 20 USD
COMPRAR
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno
Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
COMPRAR
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas
Yamil Alarcón
$ 240 USD
$ 40 USD
COMPRAR
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis