Good afternoon Community, I ask for help since a customer started me to repair a room that they used to cool beers and keep ice. This Fourth Cava Was Unused A Good Time. I started and realized that the line filter was clogged since I checked and felt cold from the discharge side. Well I set out to change the Line Filter and take advantage and clean the Expansion Valve Filter which was quite dirty .. Turn on the equipment and verify that it had good pressure (with the finger covering the high tube) Place everything in your Place And I Made A Good Empty For The Whole Team. I broke up empty with R22 gas and dedicated myself to Cargalo. Here comes the problem. I have a Compressor Model and Valve Model but I don't know how many Psi the Team Works with. Compressor Model Is Cr18kq-Pfv-240bn Brand Coopeland, And Valve Sporlan 43 Vc. I left the team with 60 Psi but I see that it does not perform as such. All the help you give me is good at this time. The equipment is 220v.

greetings leave it at 60 as it was, from there you close the vet little by little you will notice that the pressure drops to 40 psi or so

good day. It was determined with another colleague that the compressor did not have adequate suction and pumping.