⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Refrigerators

Ice cream maker HGF360B does not cut

Dante Hernan
hace 5 años
hace 5 años
Hi everyone. I comment. I have been fighting with a Gafa HGF360B refrigerator for a month (with freezer, cyclic). In the middle of winter I defrosted the freezer, cleaned the back grill, as recommended by Gafa in the manual. I turned it on and it took a long time to cut even though it was cold, after that it didn't turn on anymore. I took her to a technician "who knows more than me." The point is that the "dizque" technician told me that there was no gas or compressor problem. The problem was the thermostat. He changed it and supposedly did the corresponding tests. I brought the refrigerator and let it sit overnight. The next day I turned it on. I was happy because supposedly the equipment worked well, it turned out that 2 hours, 3, 4 passed and the refrigerator did not stop. I open the door and see in the background everything frosty, lots of ice. The freezer looked like an iceberg, there was also a lot of ice on the side walls and on the roof. In the background the temperature was discreet despite having worked 4 hours without food. I went to talk to the technician and took her again. I had a week so fucked up that I didn't even realize that the refrigerator was in the technician. One day the technician calls me and tells me that in the workshop he stops and starts at 10. He returns the refrigerator to my house (more expense for the area). Let stand overnight and plug the next day with the thermostat in the middle position. Again 4, 5, 6 hours and the ice cream maker does not cut. It becomes frost and problem after another, on the dollar hit the run, if not, I bought another and stopped renegade with this garbage. I went to complain to the technician again, he answered badly and I am on the verge of filing a complaint for fraud. He did not do the job. Apart from that by bad answering machine he deserves to be beaten but that is flour from another bag. I have read many other people who have had problems with these fridges. The one I have, completed 7 years of work without problems, so far in which this guy put his hand, I do not know if it is the original thermostat that put, anyway. I appreciate any response that helps me solve this problem, since as I stated in the previous paragraph, when hitting the dollar, it is almost impossible to replace the refrigerator with a new equipment. On the other hand the technician refuses to fix the shit that he sent himself, either because of inoperance or whatever it was, but he charged and opened prawns. As I said, that will be solved in another way, I need to know if any of you who know about the subject, since I don't know much, can give me a hand. Thank you in advance. regards
leo pc
leo pc
17
hace 5 años

Well I do not know the equipment in mention but for what you say the equipment works well the problem is that it does not cut by temperature. The thermostat must be checked, the electrical connection part that is not connected in the form of a bridge, that is, the direct pass current checks the thermostat terminals. And the other would be the sensor bulb that is in good condition and in the position indicated.

Responder
Dante Hernan
hace 5 años

Thanks Leo pc !!! I will review and comment on how it goes. Thanks again for the predisposition !!!

Responder
Fermin 007
Fermin 007
57.307
hace 5 años
hace 5 años
Dante these systems, bring a three-terminal thermostat and are placed in the evaporator below, the evaporator or plate bring a resistance that defrosts the accumulated ice and does not saturate, if you do not connect the thermostat well, because the resistance will never enter and That is saturated with ice, I do not know if the thermostat that was changed, is the same or is a generic, behind the refrigerator brings the electrical diagram, so that they connect it as it should go, eye, they have to check the resistance, maybe you already does not work, it goes to heat, when you cut the compressor, greetings
Dante Hernan
hace 5 años

Thanks for the guide Fermin 007! I'm going to talk to the technician right now. A hug!!!

Responder
Fermin 007
Fermin 007
57.307
hace 5 años

Dante, I leave this query, where is the electrical diagram of the refrigerator and the correct way to connect the thermostat:
https://yoreparo.com/refrigeracion/refrigeradores/preguntas/1435882/ubicacion-de-la-resistencia-de-descongelación
cordial greetings and equal a hug.

Responder
Fermin 007
Fermin 007
57.307
hace 5 años

Rather, the DIAGRAM tells you the correct way to connect the thermostat, eye, do not forget to check the heater or heater, luck.

Responder
Dante Hernan
hace 5 años

You are big Fermin 007. Thank you friend !!!

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis