⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥

Refrigerators

Do I have a problem with a Regina fridge with frost frize?

Samuel roja

hace 5 años

Hello everyone I repair community I am new to the refrigeration branch, I went to check a refrigerator of a customer and when I loaded the refrigerant it never went up to more than 0.8 amps and gives me a pressure down of 30 PSI off and 20 PSI switched on . My question is because the pressure does not lower to less than 5, and the amperage does not go up that I imagine that with the load it has it should rise. I hope you can help me, thanks.

Comentar

Samuel roja

hace 5 años

Thanks for your help, the compressor is decompressed, it reaches 200 psi of ajuro.



Responder



NG en linea

9.229

hace 5 años



hace 5 años

Hi . That compressor has mechanical problems, it is not pumping. Disconnect it from the lines, put the sevice valve and start it with the manifold (red clock), it should reach 450psi in a few seconds, turn off and it should remain at that pressure, if it does not get there it arrived.

Comentar