⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Refrigerators

Replacing tecumseh 1/4 A 1/5 ??? CAN YOU REPLACE?

walter Raul Salvucci
hace 5 años
hace 5 años
HELLO FRIENDS A QUESTION I HAVE A TECUMSEH 1380YS ENGINE IS OF 1/4 HP THIS BURNED IS R134. AND I HAVE AN EMBRACO MOTOR WALKING EMYE 70 HEP THAT IS OF 1/5 ALSO R134. I CAN REPLACE IT. PROBLEMS ?????????? IF THE TWO ENGINES ARE R134 I HAVE MY DOUBTS IF I REPLACE THEM AS I WOULD NOT LIKE TO SACRIFY AN ENGINE IN VANE FROM THANK YOU VERY THANK YOU I WILL VALUE YOUR ANSWERS.
tonga76
tonga76
981
hace 5 años
hace 5 años
it will not give up, it will work forced and it will also be damaged over time
walter Raul Salvucci
hace 5 años

Thank you very much for answering

Responder
Fermin 007
Fermin 007
57.307
hace 5 años
hace 5 años
If it were up, it could serve you, but since it is down, I do not recommend it, they work well for some time, but it is not known how much, place the one who wears, luck.
walter Raul Salvucci
hace 5 años

thank you very much fermin helped me to evaluate

Responder
DamianC
hace 5 años
hace 5 años
Look beyond the hp you have to verify if it is of the same cooling capacity (BTU / h) the first compressor is a 380 bone 800 BTU / h and the second is less capacity 70 bone 700 BTU / h. Therefore it will not give up. The hp is relative since they can be of the same capacity and be of different hp, since over time the compressors have been improved both mechanically and electrically by decreasing the hp but generating greater performance.
walter Raul Salvucci
hace 5 años

Thanks for the explanation I am very clear and well detailed.

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
4.64
(45)

Curso Tecnología Inverter - Fabricación de probadores y herramientas

Yamil Alarcón
$ 240 USD
$ 40 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis