Hello Sres query I have this refrigerator COVENtry NO FROST starts perfect cools the freezer but not at the bottom. The forger is perfect, trying it out .. I measure vol in the connectors I see that there is no 220 that arrives 170 .. vol is normal? It is hard for you to tear the forger ... Any suggestions? Thank you in advance I leave photo of the plate ..

Good night, I would check first if the freezer is full of ice. After that, check the freezer drain. then with unplugged refrigerator: Try freezer accessories. 1_test continuity in thermal fuse. 2_test forcing resistance in ohms Test refrigerator accessories. 1_test if the forcer works (if it has one) or if there is air flow from the freezer to the refrigerator. I hope I've helped. Cheers

[quote="elgaby1308"] Good evening, I would check first if the freezer is full of ice. After that, check the freezer drain. then with unplugged refrigerator: Try freezer accessories. 1_test continuity in thermal fuse. 2_test forcing resistance in ohms Test refrigerator accessories. 1_test if the forcer works (if it has one) or if there is air flow from the freezer to the refrigerator. I hope I've helped. greetings [/quote] Hols Sr thank you very much for the info. I told him the forger is new, I put it on and it doesn't turn like that, I take care of the connectors and I realize that there is a vol of 170 v. with that minimum current the forcer does not start and is stuck so that in the long or short it would burn .. what would be another achievement ... thank you in advance

[quote:37a344aabc="rubensiño"] the element that activates the fan is the triac that is next to the black relay on this card it is better to place the fan outlet on the lucky compressor [/quote:37a344aabc] Thank you very much, the ideal would be to repair the source but apparently it is difficult to get the triac ... So I found the return and put it with the forsador, compressor as you indicated and left 10 points ..... From already thank you very much