⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Refrigerators

LG GM323QC refrigerator did not cool down, now it does not freeze

Lorane
Lorane
2
hace 5 años
hace 5 años
Hello good day or night, my refrigerator stopped working in the lower part of it is an LG GM323 QC refrigerator, I already have about 9 years with it and only once they changed some parts of the fan because I had the same fault below does not cool and above it freezes extremely as now, they have already come to repair it and they only cleaned it defrosted and it worked again but it lasted only 3 days in good condition and then stopped cooling again accumulating a lot of ice in the freezer, disconnect it and now that it I have already stopped working completely, the fan does not work, I have checked as they say in the tutorials but apparently there is no gas leak, no damage to the terminals or cooling or heating sensors, I do not know if it is the timer and in what part I can find it to verify or replace it, I attach the photographs and I hope you can support me in advance I appreciate the information
wilmergalviz
hace 5 años
hace 5 años
Good night lorane, locate the timer turn it apparently this is locked and you must change it. The fault that presents your equipment is that the defrosting is not working well for this you must verify some spare parts inside the refrigerator such as the bimetallic and the defrosting resistance, but do the timer that should start. Comment your tests.!
pablo lamas
pablo lamas
2.661
hace 5 años
hace 5 años
Hello, you have a defrost fault check the bimetal, timer, resistance, and thermo fuse, if it is electromechanical and / or defrost sensor, resistance, thermo fuse, resistance, and card if it is electronic, also check that the fan is working correctly , greetings and comments.
Lorane
Lorane
2
hace 5 años

ok I thank you very much for the attention so fast, and I will make this review that I hope is not a major problem because I do not have much knowledge in electronics, it will be cautious thanks good night

Responder

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
4.71
(7)

Curso TV OLED y QLED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 29 USD
$ 10 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis