⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Refrigerators

Fridge digital ice maker in frizer

Jose Edward Marin    Mari
hace 5 años
hace 5 años
Good afternoon community of I repair I have a digital fridge that does not cool the bottom and when checking it I found the super hot engine and the ice frizer. Also the card in the frizer there are 2 very small devices I think they are thermostats the one I guess It cuts the motor current and activates the resitenca for defrosting. the latter when testing it marks me continuity even in cold and hot With the other I have my doubts because it opens cold and for moments it closes, it is possible to change both but I want to know if there can be a problem also on the card that produces any of these failures because when I connect the fridge to the source without the thermostat it produces An abnormal squeak or is it due to not having the thermostat? If anyone can give me some information I appreciate it in advance.
lenin_jesus
lenin_jesus
5.034
hace 5 años
hace 5 años
Hello how are you? one is a defrost sensor and the other is a thermal fuse, the hot melt when measuring it should always give you continuity since this is the one that gives way to the defrost resistance and once the evaporator is hot it opens and Do not let more current pass the defrost sensor can not be intermittent as you say change it there you have the problem greetings and comment on how you are doing
Jose Edward Marin    Mari
hace 5 años

Hello again I greet you. I tell you to change the sensor that is in the fryser and it worked for three days but then it was filled again with ice I remind you that the fridge is card. You will have to see the card with the fact that the engine warms up - which means it does not stop, or else it may be. I appreciate your cooperation.

Responder
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.84
(25)

Curso Práctico de Reparación y Bobinado de Motores Eléctricos

Héctor Castiñeira
$ 60 USD
$ 20 USD
4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.64
(11)

Curso Electrónica para Reparación de Placas

Santiago Cediel
$ 29 USD
$ 11 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis