⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta.
🔥 Aprovechar oferta ahora 🔥
Refrigerators
How to adjust the automatic of the vertical freezer Cindy F121
22
hace 5 años
hace 5 años
Hi. I wanted to ask how I can regulate the automatic because I cannot open the drawers when they are stuck with the ice. So I wanted him to cut earlier so he wouldn't freeze so much. Will it be possible? The man who changed the car a while ago, as he did not cut, I know that he turned something in the bottom behind the freezer, on the left side and began to cut. But I can't find anything to turn him now. I leave some pictures. From already thank you very much.
I can not upload the photos. I'll try again later.
101
hace 5 años
Hi. The automatic is guided by a sensor that is welded and is a tube filled with gas that is in contact with the sheet somewhere in the refrigerator to freezer. When this sensor breaks, it loses that gas and you must change the automatic. Another thing that can happen is that this sensor is released or moved from its housing and having no direct contact c the sheet q is the way to know what the device is, is still working
101
hace 5 años
hace 5 años
And it doesn't cut. Maybe that was what the technician adjusted. You should follow a little pipe that leaves from behind the control panel of the frezer and see how far it goes. The final dr cañito is usually a form of a ball that must be in contact with the cabinet plate. I hope I've helped. Do not forget to rate the comments and comment on how it was. Luck
101
hace 5 años
Yes. There is a screw in the thermostat that you can touch. Many people advise against touching it, because it is not easy to give fair regulation and it may be worse. But is it your last option? If you already checked that the vulvo of the regulator is well placed and that it works, that is, cuts and connects, there is no other. Try to mark the starting position and count how many laps you turn for one side or another
Reparaciones similares solucionadas
¡Aprende a reparar con estos cursos YoReparo!
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis
Ad