Hello everyone, this is the first time I have asked at YR, I know how to apologize if I omit something. , I changed the compressor, (AKM 19 AS-R12), also a few twisted pipes in the expansion valve ,, I emptied it, changed the gas filter, it still did not cool, it only wet the evaporator pipes and if gas increased, it came back, Then I changed the valve, I put an AP on it, it stayed the same, then they brought me a danfoss valve with a nozzle of 1, and it didn't work either, just wet the pipes, if I increase gas the low pressure goes to 50, and the high to 140 , place a liquid sight glass. The refrigerator has two evaporators with a forger of about 70 cm. each and two elbows .. my doubt is the, nozzle 1 of the danfoss is for that engine? I put the AP valve back on and closed it, the first evaporator freezes, I'm 12 low and 90 high. I left it running one day, and the temperature only reached 17 degrees. I can't find it back, the Danfoss valve I don't want to touch it, I rule out that it's wrong.

Hello!! Look and do a test !! Put a 1mm capillary about 2.50. 2.70 meters and notice that I was fuctioned!