⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
Refrigerators

Electronic Plate L For Refrigerator Bosch Kdn 49 And Mabe

martin41
hace 5 años
hace 5 años
BOSCH marcada.jpg PLATE [463.41kb] PLATE BOSCH.jpg [243.85kb] P1010109.JPG[2.60mb] P1010114.JPG [2.12mb] Some colleague who has the code of the triaks of the forcer and the value of the smd resistor that controls the current of the gate of the gate. The same exploded for burning the forcer. Greetings and thanks .... Electronic Board L For Refrigerator Bosch Kdn 49 And Mabe
martin41
hace 5 años

There I uploaded one that is correct, and the one that has the fault, unfortunately when I repair that one do not take note of the triaks of the forcer and its smd current limiting resistance of his gate ... Maybe it is a Z3m and the resistance of 470 ohms ....

Responder
Refrigeracion Oeste
hace 5 años

hello, I received a bosch kdn49, with the same problem, the busted triac and the cut environment sensor, the first thing I noticed, was the sensor, because the refrigerator was about 10 minutes and cut the compressor, change the sensor and started to establish normal periods and consequently a good cold, but I realized that, when returning from defrosting, the alarm was activated and when it reached temperatures of less than 12 or more, it went off, but it was rare for me to make that error, I uncovered the plate and I found the triac with a flash, which I don't know why replace it

Responder
rubensiño
rubensiño
22.830
hace 5 años
hace 5 años
Upload image I have an equal
rubensiño
rubensiño
22.830
hace 5 años

The triac is z3m and the resistance 8200

Responder
martin41
hace 5 años

Thanks Ruben, you're a bonnet, big hug ......

Responder
martin41
hace 5 años

Hi Ruben, I get a siemens EPK 64804, but this time with a Z9M triaks, will you have any idea what value the gate's firing resistance is? Could it be 471? It is smd, the plate is the same as the model that I consulted before .. greetings ...

Responder
Chapocabrj
hace 5 años
hace 5 años
Minha plate is EPK 64804 and is also like a Triac e SMD resistor burned, a member who, when removing or resistor or mesmo tinha or number 1 not final, is credited to be 560 ohms, but I sell a photo here posted that I am still 471 470 ohms, or Triac didn't know what was going on!
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.73
(22)

Curso Reparación de Fuentes Conmutadas de PC y Equipos Electrónicos

Maximiliano Resch
$ 40 USD
$ 20 USD
4.87
(15)

Curso Diseño de Amplificadores de Máxima Fidelidad

Maximiliano Resch
$ 29 USD
$ 13 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis